Soil–conduit interaction: an artificial intelligence application for reinforced concrete and corrugated steel conduits

Neural Computing and Applications - Marston’s load theory is commonly used for understanding the soil–conduit interaction. However, there are no practical methods available which can...     

Energy-efficient clustering in mobile ad-hoc networks using multi-objective particle swarm optimization

A mobile ad hoc network (MANET) is dynamic in nature and is composed of wirelessly connected nodes that perform hop-by-hop routing without the help of any fixed infrastructure. One of the important requirements of a MANET is the efficiency of energy, which increases the lifetime of the network. Several techniques have been proposed by researchers to achieve this goal and one of them is clustering in MANETs that can help in providing an energy-efficient solution. Clustering involves the selection of cluster-heads (CHs) for each cluster and fewer CHs result in greater energy efficiency as these nodes drain more power than noncluster-heads. In the literature, several techniques are available for clustering by using optimization and evolutionary techniques that provide a single solution at a time. In this paper, we propose a multi-objective solution by using multi-objective particle swarm optimization (MOPSO) algorithm to optimize the number of clusters in an ad hoc network as well as energy dissipation in nodes in order to provide an energy-efficient solution and reduce the network traffic. In the proposed solution, inter-cluster and intra-cluster traffic is managed by the cluster-heads. The proposed algorithm takes into consideration the degree of nodes, transmission power, and battery power consumption of the mobile nodes. The main advantage of this method is that it provides a set of solutions at a time. These solutions are achieved through optimal Pareto front. We compare the results of the proposed approach with two other well-known clustering techniques; WCA and CLPSO-based clustering by using different performance metrics. We perform extensive simulations to show that the proposed approach is an effective approach for clustering in mobile ad hoc networks environment and performs better than the other two approaches.     

Transference and retrieval of voice message over low signal strength in satellite communication

This paper presents a method of transferring voice using short messaging service in satellite communication system. The method is especially applicable in a situation where signal strength is low and voice call is not possible. In a tunnel, basement or environment with bad climate conditions, signal strength usually gets weak which make voice call difficult but SMS works in such situation. An application has been developed using J2ME language in order to test the proposed method. For experimentation, Thuraya SG-2520 satellite phone has been used.     

Effect of microstructure and fusion temperature on the electrical and optical properties of vanadate glasses

The electrical and optical properties of binary semiconducting oxide glasses containing 45 mol % V₂O₅ and 55 mol % GeO₂ fused and equilibrated at various temperatures (T ) in air were measured.T was varied over the range from 1000 to 1350° C. Their electrical and optical properties are shown to be sensitive to microstructure and melt temperature. We suggest that the change inT caused progressive microstructure changes of these glasses, which dramatically affected the electronic conductivity and the activation enthalpy for conduction.     

Spin glass behaviour in the Co2−xZnxTiO4 compound

A.c. susceptibility measurements were carried out on the disordered spinel system Co_2–x Zn _x TiO₄ (0<x<1) between 10 and 80 K. Our measurements show three peaks in the versus T curve for Co₂TiO₄ and CoZnTiO₄ compounds. In both compounds two peaks are very close to each other, indicating that the Néel and semi-spin glass temperatures are very close. A third peak indicates the presence of the semi-spin glass to spin glass transition. In Co_1.5Zn_0.5TiO₄ only one peak is observed which indicates spin glass ordering at 26 K. Furthermore, the A-site canting present in Co₂TiO₄ and CoZnTiO₄ has a collinear and magnetic structure, indicating strong A-B coupling. X-ray analysis indicated that compounds of the system Co₂Zn_xTiO₄ synthesized with cubic symmetry. From transport properties it was found that the activation energy and thermoelectric coefficient decrease with increasing concentration of Zn in the system. The mobility of the system calculated from infrared measurements is typically of the order of 10^–9cm²V^–1s^–1.     

A spectroscopic study of vanadium-phosphate glasses containing vanadium chloride

The optical properties of vanadium-phosphate glasses containing various amounts of (V₂O₅)₅₀(P₂O₅)_50–x (VCl₃) _x , wherex = 0.05, 0.06, 0.08 and 0.1, were measured as a function of VCl₃ content. It is found that by adding VCl₃ to the melt when the glass is formed, the added chlorine which acts as an oxidizing agent alters the ratio of concentration of vanadium ions and thus the absorption coefficient. Data on absorption in this study show that the power law,() =B() –E ₀) ⁿ / is best followed forn = 3, and the absorption is solely due to vanadium oxide. Furthermore, the infrared absorption spectra of this system were investigated in the wave number range 400 to 4600cm^–1. The addition of VCl₃ to the vanadium-phosphate glasses does not seem to introduce any new absorption band in this range as compared with the spectrum of a pure vanadium-phosphate glass. Furthermore, no significant difference in the absorption spectra was observed by annealing the V₂O₅-P₂O₅ glasses up to 200° C.     

Adhesion to skin

The failure energy of an adhesive bond can be factorized into two terms, one of which is a dimensionless loss function and the other, the true interfacial bonding energy, ₀. Experimental techniques have been developed to effect a separation of these two terms and thus measure ₀, but they are unsuitable for the pressure-sensitive adhesives used in surgical tapes and dressings. This is because these adhesives flow readily under load. This paper describes an extrapolation technique by which this problem can be resolved. Adhesive peel data are extrapolated both to zero peel velocity and zero load, to give a true threshold value for peeling energy which is independent of temperature. Values of ₀ are given for a natural-rubber based adhesive and substrates of glass and human skinin vivo. For glass ₀ = 28J m^–2 and for normal skin ₀ 14J m-2.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Facile Deposition of Silver Nanoparticles on Photonic Cellulose Nanocrystals Films: A Study on Solvent Stability and Post Antibacterial Activity

Cellulose nanocrystals (CNCs) incorporated with silver nanoparticles (AgNPs) photonic films have drawn considerable attention due to their plasmonic chiroptical activity. However, the exploitation of some fundamental properties for practical use such as the affinity analysis of metal nanoparticles attached to the surface of photonic films according to the solvent compatibility and antibacterial activity under physical conditions has yet not been studied. Hence, a facile process of in situ deposition of AgNPs into the chiral structure of CNC films is proposed. CNC photonic films, cross-linked by glutaraldehyde are prepared. This interaction generated the solvents-stable photonic film with a considerable amount of unreacted aldehyde functional groups that facilitates the reduction of Ag salt to AgNPs. The formed AgNPs in the photonic films show excellent stability over immersion in various polar and non-polar solvents. The post-solvent treated photonic films display excellent contact-based antibacterial behavior against gram-negative Escherichia coli.     

A fatigue-life prediction methodology for notched aluminum-magnesium alloy in gulf seawater environment

Local-strain and linear-elastic fracture-mechanics (LEFM) methodologies have been investigated for prediction of the corrosion-fatigue life of notched components of specially developed Al-2.5Mg alloys exposed to Arabian Gulf seawater environment. Corrosion-fatigue crack initiation life estimates were obtained using strain-life relationships; corrosion-fatigue crack propagation life estimates were obtained using LEFM relationships. The total corrosion-fatigue life was considered to be the sum of the crack initiation and crack propagation lives. Estimated corrosion-fatigue lives were compared with experimentally obtained corrosion-fatigue life data using center-notched specimens of three types of Al-2.5Mg alloys (containing different amounts of chromium) exposed to Arabian Gulf seawater environment. Two notch geometries, a circular notch (K _t= 2.42) and an elliptical notch (K _t= 4.2), were investigated. Good corrosion-fatigue life predictions can be obtained using local-strain and LEFM methodologies by determining the relevant material constants via a few simple fatigue tests on smooth specimens and a few crack-growth-rate tests in the environment at the frequency of interest.